2.0L Performance Tech 260hp (235hp auto) Turbocharged SS tuner version. 260 lb-ft of torque

1/4mi times

Thread Tools
 
Search this Thread
 
Old 05-06-2010 | 10:18 AM
  #1  
krh0003's Avatar
Thread Starter
Senior Member
 
Joined: 03-15-2010
Posts: 84
From: Garnet Valley, PA
1/4mi times

Posted in the racing section in a different thread but figured I'd post here too.

I ended up finding out the best combination for me was to run in competition mode while footbraking at the line. My first run was pretty much straight off the highway so the car was hot and ran a 14.21, then a 14.11, then a 14.03. After sitting in line for a bit and cooling off I pulled a 13.92. Then after a car broke and I got to sit for a good while, I finally ended up running a 13.89@101.16. Not bad for the little grocery getter. I still had the car seat in the back and all...lol. Anyway, here's the numbers:
60' 2.27 (sucks)
330 6.011
1/8 9.054
MPH 81.50
1000 11.664
1/4 13.890
MPH 101.16
Old 05-06-2010 | 11:03 AM
  #2  
foolmoon_design's Avatar
Senior Member
 
Joined: 05-13-2008
Posts: 2,075
From: Knoxville, TN
Nice Numbers, Auto?
Old 05-06-2010 | 11:39 AM
  #3  
stephenm's Avatar
Senior Member
 
Joined: 07-29-2008
Posts: 727
From: Mass
what rpm did you launch at? I was messing around and it seemed around 2500 was best.
Old 05-06-2010 | 01:27 PM
  #4  
krh0003's Avatar
Thread Starter
Senior Member
 
Joined: 03-15-2010
Posts: 84
From: Garnet Valley, PA
Originally Posted by foolmoon_design
Nice Numbers, Auto?
Yup.
Old 05-06-2010 | 01:29 PM
  #5  
krh0003's Avatar
Thread Starter
Senior Member
 
Joined: 03-15-2010
Posts: 84
From: Garnet Valley, PA
Originally Posted by stephenm
what rpm did you launch at? I was messing around and it seemed around 2500 was best.
Not 100% sure. I was just footbraking it until it was trying to go through the brakes. The track was tacky so it didn't really spin, just a little squeak then it would bog and pick back up.
Old 05-06-2010 | 02:53 PM
  #6  
asanti's Avatar
Senior Member
 
Joined: 07-15-2009
Posts: 2,070
From: Waterbury CT
Originally Posted by krh0003
Not 100% sure. I was just footbraking it until it was trying to go through the brakes. The track was tacky so it didn't really spin, just a little squeak then it would bog and pick back up.
Aha! That was my problem then. My track wasn't prepped very well at all. Launched right into tire spin.
Old 05-06-2010 | 07:05 PM
  #7  
mistermike's Avatar
Senior Member
 
Joined: 03-16-2008
Posts: 662
From: Cleveland, Ohio
Sounds like you have the turbo upgrade.
Old 05-06-2010 | 09:48 PM
  #8  
krh0003's Avatar
Thread Starter
Senior Member
 
Joined: 03-15-2010
Posts: 84
From: Garnet Valley, PA
Originally Posted by mistermike
Sounds like you have the turbo upgrade.
I have HPTuners, catless dp, magnaflow ex, hotside ic piping, an a k&n kit
Old 05-06-2010 | 09:51 PM
  #9  
krh0003's Avatar
Thread Starter
Senior Member
 
Joined: 03-15-2010
Posts: 84
From: Garnet Valley, PA
Originally Posted by asanti
Aha! That was my problem then. My track wasn't prepped very well at all. Launched right into tire spin.
Yeah the track was super sticky. I saw one of the track workers come out of his shoe for a second cause it was glued down..lol
Old 05-06-2010 | 10:30 PM
  #10  
crazysteve's Avatar
Senior Member
 
Joined: 11-24-2007
Posts: 347
From: Springfield MO
thats a great time and really good for an auto



All times are GMT -5. The time now is 02:50 AM.