2.0L Performance Tech 260hp (235hp auto) Turbocharged SS tuner version. 260 lb-ft of torque

ADM Performance Combo

Thread Tools
 
Search this Thread
 
Old 11-15-2008 | 04:42 PM
  #1  
SdgrS's Avatar
Thread Starter
Member
 
Joined: 04-27-2008
Posts: 59
From: Fort Worth
ADM Performance Combo

I just finished installing the stage II and 3’ exhaust combo from ADM Performance. The power is amazing. I went with magnaflow muffler. The sound from the 3" exhaust is nice. The HHR is still quiet enough to be on the phone with a customer while driving down the freeway. (bluetooth headset) That being said with a WOT it can be heard. The exhaust tucks in just like the stock exhaust. I have seen many after market exhaust hanging out from the bottom of cars dragging over every bump in the road. I was also able to make sure the pipes are not banging on the under side of the car. This is a nice fit. Two thumbs up on a job well done.

I am hoping to go to the track this weekend and get a time slip or two.
Old 11-16-2008 | 09:57 AM
  #2  
ADM PERFORMANCE's Avatar
Former Sponsor
 
Joined: 04-16-2008
Posts: 142
From: Mckinney
Gald to see you got it installed with out a hitch.Post some good time once you get back from the track...






Originally Posted by SdgrS
I just finished installing the stage II and 3’ exhaust combo from ADM Performance. The power is amazing. I went with magnaflow muffler. The sound from the 3" exhaust is nice. The HHR is still quiet enough to be on the phone with a customer while driving down the freeway. (bluetooth headset) That being said with a WOT it can be heard. The exhaust tucks in just like the stock exhaust. I have seen many after market exhaust hanging out from the bottom of cars dragging over every bump in the road. I was also able to make sure the pipes are not banging on the under side of the car. This is a nice fit. Two thumbs up on a job well done.

I am hoping to go to the track this weekend and get a time slip or two.
Old 11-20-2008 | 10:39 PM
  #3  
SdgrS's Avatar
Thread Starter
Member
 
Joined: 04-27-2008
Posts: 59
From: Fort Worth
My best time was 13.7 last weekend with a 2.43 60 ft.

I need a better set of tires. 1st and 2nd just spin.
Old 11-20-2008 | 10:48 PM
  #4  
08redhhrss's Avatar
Senior Member
 
Joined: 09-14-2008
Posts: 221
From: Ohio
post a time slip so we can compare 60' and 1/8 mile, Awesome times!
Old 11-21-2008 | 05:30 AM
  #5  
bodywerks's Avatar
Member
 
Joined: 08-22-2008
Posts: 65
From: alabama
Originally Posted by SdgrS
My best time was 13.7 last weekend with a 2.43 60 ft.

I need a better set of tires. 1st and 2nd just spin.
Damn that quick for exhaust and tune. Props Andy and the boys at ADM.
Old 11-21-2008 | 07:34 PM
  #6  
SdgrS's Avatar
Thread Starter
Member
 
Joined: 04-27-2008
Posts: 59
From: Fort Worth
My Time Slip

60' 2.43
330' 6.10
1/8 9.11 mph 83.73
1000 11.63
1/4 13.79 mph 104.34
Old 11-21-2008 | 07:45 PM
  #7  
camaro98z28's Avatar
Senior Member
 
Joined: 07-23-2008
Posts: 1,148
From: Peoria, AZ
not bad at all. I think with a tad bit better driving a colder weather I can hit the 100 MPH in stock tune. ET's suck for me LOL
Old 11-21-2008 | 11:46 PM
  #8  
08redhhrss's Avatar
Senior Member
 
Joined: 09-14-2008
Posts: 221
From: Ohio
Originally Posted by SdgrS
My Time Slip

60' 2.43
330' 6.10
1/8 9.11 mph 83.73
1000 11.63
1/4 13.79 mph 104.34
You made up some serious ground after the 60ft......my best is a 2.34 60ft and the et was 14.16 at 103. I wonder where the difference is. 330 ft 6.3, 1/8 mi 9.38 at 79 mph 1000ft 11.9. What technique did you use? NLS and where did you shift at. Did you cross the line in 3rd or 4th? I'm just into 4th crossing the line. Stock tires 1/2 tank of gas. I know, a lot of questions...just curious. Nice work!
Old 11-22-2008 | 02:11 AM
  #9  
SdgrS's Avatar
Thread Starter
Member
 
Joined: 04-27-2008
Posts: 59
From: Fort Worth
Originally Posted by 08redhhrss
You made up some serious ground after the 60ft......my best is a 2.34 60ft and the et was 14.16 at 103. I wonder where the difference is. 330 ft 6.3, 1/8 mi 9.38 at 79 mph 1000ft 11.9. What technique did you use? NLS and where did you shift at. Did you cross the line in 3rd or 4th? I'm just into 4th crossing the line. Stock tires 1/2 tank of gas. I know, a lot of questions...just curious. Nice work!
I am not sure what the difference is. The shift light is set to 6150 on the Aeroforce gauge. I did not use TC on this run. I did use "no lift shift".
Old 11-22-2008 | 05:00 PM
  #10  
ADM PERFORMANCE's Avatar
Former Sponsor
 
Joined: 04-16-2008
Posts: 142
From: Mckinney
Nice times,I am glad to see we finally got some local track time for our exhaust and tune.

I may be selling the intercooler off my car...Interested?



All times are GMT -5. The time now is 09:00 AM.