stage 1 kit install Toronto Area
#5
One fellow had his Solstice GXP upgraded. Perma-grin.
I ordered the kit last week and will be getting it installed at Schleuters. They're pretty decent as far as service goes.
#7
I know this is a double post... but this is for the Canucks here...
Advertised stats for the HHR SS with Stage 1 is 290HP, 315 Torque
Best pull on the dyno today in Brantford was:
274.13 WHP
280.90 Torque
Peak engine performance was at 5500 rpms
It really drops off after 5700 rpms.
94 octane gas
So... guys at the shop said HP loss due to standard transmission was 10-12%, but weren't sure about FWD losses.
I read an online article about FWD losing about an average of 15% through the transmission.
If this is the case... 315HP!
At 12% loss, we're still talking 307HP.
More than advertised anyways! I can't complain.
R.
Advertised stats for the HHR SS with Stage 1 is 290HP, 315 Torque
Best pull on the dyno today in Brantford was:
274.13 WHP
280.90 Torque
Peak engine performance was at 5500 rpms
It really drops off after 5700 rpms.
94 octane gas
So... guys at the shop said HP loss due to standard transmission was 10-12%, but weren't sure about FWD losses.
I read an online article about FWD losing about an average of 15% through the transmission.
If this is the case... 315HP!
At 12% loss, we're still talking 307HP.
More than advertised anyways! I can't complain.
R.
#9
Thread
Thread Starter
Forum
Replies
Last Post