Surprise!
#21
indeed it is! i'll try to get a side shot soon to show how far it sticks out, it really does fit amazingly well. i'll get to see tonight if there is any drone at highway speeds. so far in town it doesn't sound like it has increased interior sound very much. obviously it has a little, but i'll let you all know tomorrow how it sounds going faster.
Just saw the post,Glad to see you like,not bad for mandrel bent and great fit,sound to boot!
I have an update today.
The system will consist:
Full 3" 304 stainless tig welded mandrel bent cat back exhaust system
100% cad designed
Laser cut flanges
Polished Stainless Rolled Tip
Lifetime warranty
Large Body 3" Straight through muffler
All necessary install hardware
Made in USA
Last edited by HillsdaleHHR; 08-13-2008 at 08:31 AM. Reason: Removed comment per site rules
#22
#24
anyways, my report on highway speed drone...THERE IS NONE! i'd have to get up around 75-80mph to get closer to 3000-3100rpm cruising to get any real increase in sound inside over stock. for the most part while cruising, it keeps pretty quiet, unlike so many of the obnoxious, blatty, ricer kitty-cannons. nice rumble at idle and just off, kinda quiets down a bit nearly to stock sounding between about 2kand 3k rpms, then you start to really hear it go, and it's just a fantastic sound.
i strongly advise all, if youre looking for a catback for your SS, look no further than ADM (and no i'm not getting paid to say that, seriously). looks great, sounds great, performs great, and pretty darn easy to install too. the ramps my SS is on in the videos is how it sat for the install. however after attaching the midpipe, when it came time to stick the front end of the axle-back portion over the rear suspension, i had to have my brother lay under the spare tire well and push up to get enough clearance for these monster pipes between th suspension and the heat shield JUST in front of the rear suspension. that was really the ONLY somewhat tricky part of the install.
#25
It will not be magnaflow muffler,I am using one of my long time vendors whom I have done our own special parts with in past.If your dead set on magnaflow muffler than we may have something for you..but honestly the product/company I am using is hands down one of the best in the performance exhaust world.
We are also looking into an optional muffler delete option as well that you can do a quick change before the track,if you know what I mean.
Pricing is yet to be determined,but will reflect current product quality/price that is similar in design.
More to come
Andy
We are also looking into an optional muffler delete option as well that you can do a quick change before the track,if you know what I mean.
Pricing is yet to be determined,but will reflect current product quality/price that is similar in design.
More to come
Andy
Last edited by HillsdaleHHR; 08-13-2008 at 08:30 AM. Reason: Removed comments per site rules
#27
It will not be magnaflow muffler,I am using one of my long time vendors whom I have done our own special parts with in past.If your dead set on magnaflow muffler than we may have something for you..but honestly the product/company I am using is hands down one of the best in the performance exhaust world.
We are also looking into an optional muffler delete option as well that you can do a quick change before the track,if you know what I mean.
Pricing is yet to be determined,but will reflect current product quality/price that is similar in design.
More to come
Andy
We are also looking into an optional muffler delete option as well that you can do a quick change before the track,if you know what I mean.
Pricing is yet to be determined,but will reflect current product quality/price that is similar in design.
More to come
Andy
#28
exactly what i'm thinking. i will eventually be removing the first chunk of the midpipe, where the flange is, and basically just shortening that pipe, saving the piece, and putting in a cutout. basically it will be the flange on the DP, the cutout, flanged on both sides so it is removable and replacable with just a piece of pipe with flanges (i'm told the presence of a cutout on a car results in automatic fail on smog visual inspections, so the piece of pipe will be put in place when it's time for inspection), then the rest of the catback after that.
#29
A Borla Muffler maybe? :) I do like the fact that there is no increase exhaust sound inside. whats the stock size anyways? 2 3/4 inch? Anyways looks great and sounds good.
I do believe that just changing the exhaust or intake will not void warrenty.
I do believe that just changing the exhaust or intake will not void warrenty.
#30
stock i think is 2 1/2" not sure though. this stuff is much larger than stock. seeing them side by side in person was amazing at the size difference. and the increased exhaust sound inside does happen, just not until you start getting up in rpms pretty good.
Thread
Thread Starter
Forum
Replies
Last Post