2.4L Performance Tech 16 valve 172 hp EcoTec with 162 lb-ft of torque

2.4 stage2 triflow cams

Thread Tools
 
Search this Thread
 
Old 10-21-2006, 12:39 AM
  #1  
New Member
Thread Starter
 
G5Mike's Avatar
 
Join Date: 10-21-2006
Location: Delta
Posts: 11
2.4 stage2 triflow cams

hey Guys hope you dont mind a G5 Gt same engine different look is all,love the HHR though,comming from a vibe gt Im partial to the look of a four door with the hatchAnyways. Im posting here cause I had a few visits from your members who have taken an interest in the JBP cams Im about to test.These cams have been updated to the 2.7L stage 2 triflow cams,I have just got back from picking them up,and I will be putting them back on Sunday,Im gonna ride with them for a week, then do the dyno for jbodyperformance,gains are expected between 22 and 28WHP or you can convert that to the crank??. Being that we are vvti we should not have to tune these in,unlike our non-vvti counterparts. Im sitting here looking at these cams and its killing me cause I have to wait for my bud to put them on for me on Sunday,anyways Ill update you all on Monday as to how the cams feel and interact with our 2.4s. Ill be sure to post here more often now that I sighned up I been lurking here for a few months cause we are gonna add the 2.4 HHR to the family in the spring Talk to you all in a few days
G5Mike is offline  
Old 10-21-2006, 07:49 AM
  #2  
Senior Member
 
upOnGamE's Avatar
 
Join Date: 07-01-2006
Location: WiChita stationd, San Diego HoMe,
Posts: 298
Hey mike welcome and thanks you know i'm drooling for monday as much as you, so you think a tune will greatly increase it with supporting mods?
upOnGamE is offline  
Old 10-21-2006, 10:09 AM
  #3  
New Member
Thread Starter
 
G5Mike's Avatar
 
Join Date: 10-21-2006
Location: Delta
Posts: 11
Originally Posted by upOnGamE
Hey mike welcome and thanks you know i'm drooling for monday as much as you, so you think a tune will greatly increase it with supporting mods?
You are thinking like me,Were hoping a tune wont be nessasary,that way we all can save our money and wait for all the goodies to be on the car first,once again a hp tune alone is worth 15 to 20 WHP and then if you want to do a valve swap eventually it also raises your rev limitor,my favorite thing is also that hp tuners flattens out the torque curve along with shift management
G5Mike is offline  
Old 12-19-2006, 07:26 PM
  #4  
New Member
Thread Starter
 
G5Mike's Avatar
 
Join Date: 10-21-2006
Location: Delta
Posts: 11
well guys the cams have been in for a week now, and all I can say is holy frickin wow! these have to be the best mod for our cars hands down,amazingly the car took right to them and no tune was required, but I'm sure one would make the cams even better, thecar just screams with power from 3800rpm up, I noticed no loss of low end torque,the power actually frightened me a couple of nights ago,I downshifted on the highway going up a slope and the cams unleashed their power.I will say that a downpipe would compliment the cams though, cause the intake cam is the more agressive of the two and it just suckin in the air and the stock DP can't keep up.oh yeah the engine screams loud aggression when you hit the 3800rpm and higher so be wary of scaring kids and small animals
G5Mike is offline  
Old 12-19-2006, 08:05 PM
  #5  
Platinum Member
 
Snoopy's Avatar
 
Join Date: 05-09-2006
Location: "Upland" Mesa, Arizona
Posts: 6,805
Thanks for the update, mike. I've been following you on the other forum. Did JBP give any idea of when they will hit the market???
Snoopy is offline  
Old 01-03-2007, 09:22 PM
  #6  
Senior Member
 
crowbar's Avatar
 
Join Date: 02-27-2006
Location: NC
Posts: 1,198
updates please
crowbar is offline  
Old 01-04-2007, 07:07 AM
  #7  
Senior Member
 
upOnGamE's Avatar
 
Join Date: 07-01-2006
Location: WiChita stationd, San Diego HoMe,
Posts: 298
he has his dyno and tune tomorrow, so we will know then, other then that the butt dyno he says is remarkable, once the dyno's are back there will be a group buy on the product on cobaltss.net,
upOnGamE is offline  
Old 01-13-2007, 07:21 PM
  #8  
New Member
Thread Starter
 
G5Mike's Avatar
 
Join Date: 10-21-2006
Location: Delta
Posts: 11
Originally Posted by Snoopy
Thanks for the update, mike. I've been following you on the other forum. Did JBP give any idea of when they will hit the market???
they have already started selling them...anyways my dyno went to ****, the dyno was ****ed and actually showed me at a decrease of power more money shot,,nor could we get into the hp tuners so we are trying to resolve this and get a dyno/tune at a better shop
G5Mike is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wolfblitz
2.0L Performance Tech
51
06-11-2017 04:18 PM
Panel08
2.2L Performance Tech
16
04-27-2009 04:46 PM
Lithium Lotus
2.0L Performance Tech
26
02-10-2009 07:59 AM
Jay Budget
2.2L Performance Tech
3
04-07-2008 04:12 PM
hhr213
2.2L Performance Tech
4
11-30-2006 08:34 PM



Quick Reply: 2.4 stage2 triflow cams



All times are GMT -5. The time now is 08:33 AM.