Calling all 3 bar grille owners
01-31-2009, 09:10 AM
#11
Senior Member
Join Date: 04-22-2006
Location: Mansfield, Texas
Posts: 415
Correct, the mesh makes a turn into the sides of the grill. It is done the same on both grills. Here's a photo that shows where the mesh was cut along the sides, after the cut is made I bent the edge with pliers for a clean fit.
01-31-2009, 03:00 PM
#12
Senior Member
Join Date: 05-26-2008
Location: Westerville, Ohio
Posts: 618
Her is my One Bar grill patterned after GTOMike's. This is alo of work, but to me was well worth it.
https://www.chevyhhr.net/forums/atta...1&d=1233435567
https://www.chevyhhr.net/forums/atta...1&d=1233435567
01-31-2009, 03:52 PM
#14
Senior Member
Thread Starter
Join Date: 01-04-2008
Location: Long Beach, Ca
Posts: 2,366
That looks amazing and really sharp work. Thanks for all the replies, especially the close up shots. We did Kris's rear springs and a sway bar today and I got to swap out my grille. After really looking at it, there is really no other way to remove the bars without the curved cut outs. Nevertheless, the right pattern of mesh and fitting it flush will make it ok I think. I just have to make it white.
01-31-2009, 05:46 PM
#17
Senior Member
Join Date: 09-15-2008
Location: Whittier,ca.
Posts: 1,322
grille mesh
Hey Don, i'm not sure what kind mesh they were using on their grille's. But at my work i sell a steel mesh that has a 1/4 hole hexagon mesh that might work. I was thinking of a g2g next weekend after work to do some mods but they are forcasting rain for next weekend.Maybe the week after.
08-21-2021, 07:33 PM
#19
Join Date: 08-21-2021
Location: Illinois
Posts: 1
Where do you get the grille like that with the word CHEVROLET on it?
I have a few 3 bar photos for you. I had the same question when I did mine, how much of the bars need to be removed and what will it look like. I've done both.
This is my first 3 bar, I only removed the bars and no additional material from the sides of the grill.
Attachment 34437
Attachment 34438
Attachment 34439
Here's the second one, on this one the extra material on the sides were trimmed off to make a smooth edge. Small detail, and just a little more work for a more finished product. To give credit where it is due, CJ did the work on this 3 bar.
Attachment 34440
Attachment 34441
This is my first 3 bar, I only removed the bars and no additional material from the sides of the grill.
Attachment 34437
Attachment 34438
Attachment 34439
Here's the second one, on this one the extra material on the sides were trimmed off to make a smooth edge. Small detail, and just a little more work for a more finished product. To give credit where it is due, CJ did the work on this 3 bar.
Attachment 34440
Attachment 34441
