Appearance/Modifications Discussions Body Kits, Hoods, Spoilers, Interiors,Engine Compartments,Exhaust

Just installed a Cobalt steering wheel.

Thread Tools
 
Search this Thread
 
Old 11-19-2009 | 04:40 PM
  #1  
Jim's 2009's Avatar
Thread Starter
Senior Member
 
Joined: 10-11-2009
Posts: 149
From: PA
Just installed a Cobalt steering wheel.

The install was so fast I forgot to take any pictures, just the final results. That leather wheel is nice and love the radio buttons. It was as easy as plug and play!


Last edited by HillsdaleHHR; 11-19-2009 at 04:43 PM. Reason: Reduced pic size to max 640 x 480!!!
Old 11-19-2009 | 05:05 PM
  #2  
outlandishhhr's Avatar
Senior Member
 
Joined: 07-16-2006
Posts: 566
From: Centennial, Colorado
Nicely done!
Old 11-19-2009 | 07:27 PM
  #3  
pyro panel's Avatar
Former Sponsor
 
Joined: 08-18-2009
Posts: 1,036
From: Canada
this came from a cobalt???I have the same wheel in mine..thought it was factory...
Old 11-19-2009 | 09:07 PM
  #4  
Jim's 2009's Avatar
Thread Starter
Senior Member
 
Joined: 10-11-2009
Posts: 149
From: PA
From a 08 Coblat at is what the e-bay seller said. $104 including shipping.
Old 11-19-2009 | 09:09 PM
  #5  
HillsdaleHHR's Avatar
Senior Member
 
Joined: 08-20-2006
Posts: 21,640
From: Hillsdale, Michigan
The Cobalt Steering Wheel is smaller in diameter than the HHRs.
Old 11-19-2009 | 09:40 PM
  #6  
IgottaWoody's Avatar
Senior Member
 
Joined: 01-13-2008
Posts: 4,708
From: Washington State, where it rains
Its the same as the SS wheel
Old 11-20-2009 | 02:02 AM
  #7  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 15,984
From: SE USA
That does look good, much smaller than my 2LT wheel.. Very Cool..

I polished off the gold tone on the bow-tie on mine.
Old 11-20-2009 | 06:11 PM
  #8  
Jim's 2009's Avatar
Thread Starter
Senior Member
 
Joined: 10-11-2009
Posts: 149
From: PA
The wheel is noticeably smaller but not by much. I have lowered my steering column so as to tilt my wheel down more and the smaller wheel makes it easier to see the speedo.
Old 12-13-2009 | 05:41 PM
  #9  
tlipcsik's Avatar
New Member
 
Joined: 11-01-2008
Posts: 15
From: Brook Park, Ohio
Did the original air bag fit the Cobalt wheel OK? Also, did you have to do any resetting of the Air Bag System? I have one on order and would like to know if I need to expect any issues.
Old 12-14-2009 | 03:11 PM
  #10  
DefVinative's Avatar
 
Joined: 12-05-2009
Posts: 7
From: Chicago
How does the wheel come off in the first place?



All times are GMT -5. The time now is 10:25 AM.