Appearance/Modifications Discussions Body Kits, Hoods, Spoilers, Interiors,Engine Compartments,Exhaust

will the hhr ss front bumper fit on my hhr lt1 06

Thread Tools
 
Search this Thread
 
Old 01-28-2008 | 07:52 PM
  #1  
NEXTIMAGE's Avatar
Thread Starter
New Member
 
Joined: 01-28-2008
Posts: 14
From: Auburn WA
will the hhr ss front bumper fit on my hhr lt1 06

Old 01-28-2008 | 08:05 PM
  #2  
jx3's Avatar
jx3
Senior Member
 
Joined: 10-19-2005
Posts: 20,687
From: Miami
It should but you would need to get the SS grill or modify the regular bumper as there would be a gap between the grill and bumper.
Old 01-28-2008 | 08:08 PM
  #3  
NEXTIMAGE's Avatar
Thread Starter
New Member
 
Joined: 01-28-2008
Posts: 14
From: Auburn WA
where can i purchase the ss front bumper and grill?

i can not figure out where to purchase the ss front bumper
Old 01-28-2008 | 08:24 PM
  #4  
AllEyezOnMe's Avatar
Senior Member
 
Joined: 07-26-2007
Posts: 136
From: Phillipsburg New Jersey
I'd also like to know where to find the SS body parts. My wife won't let me trade mine in, so I'm gonna turn my existing HHR into an SS, but better and faster.
Old 01-28-2008 | 08:31 PM
  #5  
donbb82's Avatar
Senior Member
 
Joined: 04-21-2007
Posts: 472
From: Janesville, Wisconsin
I asked my chevy dealer parts dept that question and he looked up the parts and said that it would not fit.

He said the fog lamps are different.

If you look at it the fog lights look like they are over more than the regular HHR. I have the 2LT and wanted to get the bumper, he said the bumper was $400 and you also need the absorber and a few other parts as well as that is different. He said alot of the parts are not even available yet.

I asked him what if you have a 2008 SS and it has been in an accident. He said they would have to get one from the factory.

This is what I have been told.
Old 01-29-2008 | 07:47 AM
  #6  
solman98's Avatar
Senior Member
 
Joined: 07-17-2006
Posts: 6,052
From: Dallas, GA
Originally Posted by donbb82
I asked my chevy dealer parts dept that question and he looked up the parts and said that it would not fit.

He said the fog lamps are different.

If you look at it the fog lights look like they are over more than the regular HHR. I have the 2LT and wanted to get the bumper, he said the bumper was $400 and you also need the absorber and a few other parts as well as that is different. He said alot of the parts are not even available yet.

I asked him what if you have a 2008 SS and it has been in an accident. He said they would have to get one from the factory.

This is what I have been told.
You would have to swap the entire front clip minus the hood and fenders. But It would bolt right up.
Old 01-29-2008 | 04:20 PM
  #7  
Surfer Panel's Avatar
Member
 
Joined: 01-03-2008
Posts: 86
From: Orange County Calif.
I was thinking of the swap but to do it right means front bumper assy, fogs, grill and rear bumper assy -- then paint. Probably 1500-2500 depending on paint quality. Lots to me as I am just finishing my 08 purchased 12/28 and doing a new tear-drop trailer project.
Old 01-29-2008 | 07:05 PM
  #8  
GTOMIKE's Avatar
Senior Member
 
Joined: 06-27-2006
Posts: 732
From: Kingsville On
Here`s the part #`s now if some one can get chevy to cough up the prices the modding can begin.


25809884 2008 SS lower grille
25809885 SS fog lamp bezel
25809886 SS fog lamp bezel
25918728 SS upper grille
25809912 SS upper grille bezel
Old 01-29-2008 | 10:44 PM
  #9  
BigMOCats's Avatar
Senior Member
 
Joined: 08-19-2007
Posts: 778
From: St. Louis
Originally Posted by GTOMIKE
Here`s the part #`s now if some one can get chevy to cough up the prices the modding can begin.


25809884 2008 SS lower grille
25809885 SS fog lamp bezel
25809886 SS fog lamp bezel
25918728 SS upper grille
25809912 SS upper grille bezel

I think you're gonna need more than that.
Old 01-30-2008 | 03:22 PM
  #10  
Surfer Panel's Avatar
Member
 
Joined: 01-03-2008
Posts: 86
From: Orange County Calif.
Don't forget about the rear bumper



All times are GMT -5. The time now is 10:24 AM.