Daytonablue06

OK guys so im upgrading my stereo.. YIPPEE! i have an 06 LT fleet with midgrade stereo (not the one without MP3 capability, but no pioneer either or USB/PAL either) I have already installed a kenwood head unit years ago but decided i really want the look of the factory as i painted radio ac and center surround in... yes u guessed it Daytona Blue! ive got a set of alpine sps-600s for the rear doors and sps-610c for the front, i nearly had an amp and sub installed professionaly because i was scared of the wiring but after talking to Shaun at 919 Audio in Raleigh NC he talked me into doing this myself as ive learned so much from this site already and can take the car apart on my own. Now what my question is i want a 5 channel so i can amp all speakers and a sub. but with the PAC harness for adding an amp to factory only has 2 RCA outputs. when i begun my upgrade i had that kenwood radio and it had 3 rca outputs and so now after talking to Shaun ive figured out how to install all this but now im lost now that i want to go back to the orgina radio and purchasing that harness... Sorry if this has already been discussed but i couldnt find it by searching
Thanks Guys

oops i labled this wrong, 3 RCA outputs from radio.. Doh

prod

Sounds like this is what you need, most stereo shops carry them.

Http://www.audiocontrol.com/222456/p...r----LC6i.html

Daytonablue06

oh god... this is just getting to be tooooo complicated i dont know what all these damn abbreviations mean.. all i need is an adapter that connects into the back of the radio so that it can be amplified, but i need it to have 3 sets of RCA cables. plain and simple. the one from PAC has only 2, but i need one for the sub as well.. Thank you Prod for your help

Father Azmodius

Does the amp have a switch so it pulls the sub signal from the rear signal?

Daytonablue06

i dont know, back of radio has Front Rear and Sub... that it. i just need adapter that has 3 rca outputs.. point blank that it. where do i find it? thats all im askin

Father Azmodius

If your amp can feed the subs off of the rear inputs, then you only need 4 channels and finding 4 channel line level converters is much easier.