Audio and Video All audio, video, alarms, and all other electronics

Dual 12" Kicker CVR vs. 12" Kicker L7

Thread Tools
 
Search this Thread
 
Old 12-30-2008, 01:39 PM
  #21  
Senior Member
 
Eric B's Avatar
 
Join Date: 09-20-2008
Location: Iowa
Posts: 210
id build a custom box.. i dont like prefab boxes but thats jus me
Eric B is offline  
Old 12-31-2008, 01:54 AM
  #22  
Senior Member
Thread Starter
 
Digital_Rapture's Avatar
 
Join Date: 05-13-2008
Location: Louisville, KY
Posts: 207
Talking zx1000.1/L7 Install

After a few calls to kicker I was able to get some good advice on how to set things up. I'll write that up in here later today. But here's what's going on. I am starting to notice that this 1 L7 doesn't hit as hard as the 2 cvr's (as previously mentioned as a possibility) but I still get some darn good knock out of it. Still get roof/cargo door flex but not as bad. And to be completely honest my cvr's where just ridiculously loud when I cranked it so I'm good. It's acutally a minium difference to where I think I'll be the only to notice it. I also get half my cargo space back (my goal for this project) which came in handy later that day for taking the christmas tree n decorations back to storage. I opted to sit the box in the driver's side corner because...
A) Where the 60/40 split it is, all I have to do is just fold down the 60 side and front passenger seat and I have plenty of space.
B) With it in that corner, the port has plenty of clearence for airflow.
C) With the speaker facing up I get 2 more inches of space from the box to the edge of the cargo area.
D) I think it just looks cooler with the box facing up as well.

I cut a piece of some non skid material (that stuff that comes in rolls and you use them in your kitchen cabinets and drawers) to keep the box from sliding over. Took a few sharp turns and take offs for a test and the box was still place.

I opted to take out the polyfil but I think I'm going to put it back in. I couldn't really notice a difference. Also, my buddy is going 2 sell me his kinetik battery n relay so that should help out with power as because there is definitly some dimming going on when the bass hits.

On a side note, there was this funky smell coming from the box. Any of you sound tech specialists have any thoughts on this?

I called the shop and they said it was just the voice coils breaking in. Not quite sure about those guys since how they initially set the gain was higher than what Kicker CS told me... (audio shop said to put it @ 3/4 and I was to control bass from HU) More to come later on another post...

And thank you everyone for helping me out on this one!!!




Last edited by Digital_Rapture; 12-31-2008 at 05:03 AM.
Digital_Rapture is offline  
Old 12-31-2008, 02:36 PM
  #23  
Senior Member
 
Ed RazorLite's Avatar
 
Join Date: 01-28-2008
Location: Pennsylvania
Posts: 214
Lookin good man.

You will get slightly louder by firing the port back. Not sure if you will notice by ear though, may be less than 1 dB gain.

My tests showed 2 optimal positions for high SPL. The one that sounded best while being loud is Subs Up, Ports Back. thats what I have now.
The second is subs to the side and ports up, but sounds bad.

The smell you are experiencing could be the coating on the voicecoil heating up. Most of the time it is harmless.
The glue and coatings will heat up and reset then the smell will go away.
If it doesnt go away you are pushing it too hard.
Ed RazorLite is offline  
Old 12-31-2008, 04:59 PM
  #24  
Senior Member
Thread Starter
 
Digital_Rapture's Avatar
 
Join Date: 05-13-2008
Location: Louisville, KY
Posts: 207
Originally Posted by Ed RazorLite
Lookin good man.

You will get slightly louder by firing the port back. Not sure if you will notice by ear though, may be less than 1 dB gain.

My tests showed 2 optimal positions for high SPL. The one that sounded best while being loud is Subs Up, Ports Back. thats what I have now.
The second is subs to the side and ports up, but sounds bad.

The smell you are experiencing could be the coating on the voicecoil heating up. Most of the time it is harmless.
The glue and coatings will heat up and reset then the smell will go away.
If it doesnt go away you are pushing it too hard.
Thanks man! I just finished putting the polyfil back so I'm going to try option 1 you suggested. Also running short on time for tonight so I will have to do the "kicker" write up after the new year...

Everyone be safe and have a happy new year!

After Trial...
Just got back from driving around with it... Now it honestly sounds louder then the dual cvr's and my remote bass knob is cranked to noon. Probably a combinations of putting the polyfil back in and as Ed recommended placing the sub up and the port firing back. I'm really stoked about this now. Created more space in the cargo area and got a bit more knock out of her...

Last edited by Digital_Rapture; 12-31-2008 at 05:31 PM.
Digital_Rapture is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fivestring
Audio and Video
38
09-05-2012 03:53 AM
696
Audio and Video
3
12-22-2008 09:26 PM



Quick Reply: Dual 12" Kicker CVR vs. 12" Kicker L7



All times are GMT -5. The time now is 12:11 PM.