FYI on the Brembo's for the upgrade guys
#1
FYI on the Brembo's for the upgrade guys
I picked up a pair of these off of my local AutoZone. I run a shop and had them get a set for me to check out. I got these, and they sell them on the counter at $75 or so after the core... These are ready to go with the cross over line, and fresh seals from brembo.. a few scratches, much cheaper, and a warranty. By the time I pull the wagner pads, and rotors from the stock room and add these, I'll have less in these than what I can grab the calipers online for... pics coming soon, as business allows me to snag an open bay...
#3
Last edited by firemangeorge; 05-30-2014 at 11:06 PM.
#4
I picked up a pair of these off of my local AutoZone. I run a shop and had them get a set for me to check out. I got these, and they sell them on the counter at $75 or so after the core... These are ready to go with the cross over line, and fresh seals from brembo.. a few scratches, much cheaper, and a warranty. By the time I pull the wagner pads, and rotors from the stock room and add these, I'll have less in these than what I can grab the calipers online for... pics coming soon, as business allows me to snag an open bay...
#7
this is my personal experience, and thought I would share....
ADV and oreilly both procrastinated and lost the sale.... these guys did the trick, so use who you want....
if you want to keep the calipers, add 50 bucks each...
you guys sure are the life of the party!
ADV and oreilly both procrastinated and lost the sale.... these guys did the trick, so use who you want....
if you want to keep the calipers, add 50 bucks each...
you guys sure are the life of the party!
#8
Ya..been watching for awhile now when they get them in stock...they listed them for awhile now butno stock....well, they are in now...was just at oreillys last week and they now have them...at around the same price...and will price match. It was only a matter of time, calipers dont last forever
#9
Just a quick update... my aftermarket wheels are not even close to fitting over these monsters. I'm trying to source some 1" hub centric spacers to test drive before i condemn the wheels.. i like them to much to ditch at this point! the car is going intot he paint shop, ao I have a week to get them in