Aftermarket HHR Components.
09-25-2007, 11:28 AM
#11
Member
Thread Starter
Join Date: 04-07-2006
Location: Toronto
Posts: 44
how about the 2.2?
I'm in Oakville... depending on what you you were looking at I might be a willing donor car :)
09-26-2007, 07:27 AM
#16
Member
Thread Starter
Join Date: 04-07-2006
Location: Toronto
Posts: 44
For now, CrashMan82 is our 2.4L HHR test car. We've scheduled him end of week for design of a true cold air intake for this car. Is there any 2.2L HHR members or anyone slated for an HHR SS that can make it to our shop?
09-27-2007, 07:55 PM
#18
Senior Member
Join Date: 06-24-2006
Location: Bowling Green, OH
Posts: 2,315
09-27-2007, 08:36 PM
#19
Senior Member
Join Date: 10-02-2005
Location: VA
Posts: 1,245
Mev (JBP),
I certainly hope you do better here and respond to problems with your poorly designed, over priced and over-hyped components, such as cams that cause problems, valve springs that break, header that does not fit, etc., better than on the (our "sister" site) on http://www.cobaltSS.net, where people had numerous problems with your products, service and you have, after no response and support, have pretty much disappeared.
Where are creditable dyno test results on the LE5 cams? Or, for that matter, any positive feedback?
Folks, better to bring this out into the open before this dubious company becomes a supporting vendor and repeats what has happened on the Cobalt forum. Beware!!
I certainly hope you do better here and respond to problems with your poorly designed, over priced and over-hyped components, such as cams that cause problems, valve springs that break, header that does not fit, etc., better than on the (our "sister" site) on http://www.cobaltSS.net, where people had numerous problems with your products, service and you have, after no response and support, have pretty much disappeared.
Where are creditable dyno test results on the LE5 cams? Or, for that matter, any positive feedback?
Folks, better to bring this out into the open before this dubious company becomes a supporting vendor and repeats what has happened on the Cobalt forum. Beware!!
09-27-2007, 08:43 PM
#20
Senior Member
Join Date: 05-25-2007
Location: Ontario
Posts: 181
You and me both! 
Had a good afternoon at JBP, good couple of guys and they do some real quality custom work! To hear some of the things these guys came up with was really exciting.
If they're able to pull it off, then we'll see something really unique come together.
I never worry about warranty either... though I've got one little thing to check on before I ditch it entirely
Had a good afternoon at JBP, good couple of guys and they do some real quality custom work! To hear some of the things these guys came up with was really exciting.
If they're able to pull it off, then we'll see something really unique come together.
I never worry about warranty either... though I've got one little thing to check on before I ditch it entirely