Aftermarket HHR Components.
10-11-2007, 07:30 AM
#41
Member
Thread Starter
Join Date: 04-07-2006
Location: Toronto
Posts: 44
- We already have a coilover system that will fit the HHR too.
Unfortunately, Body kits and tails are things we don't do.
Last edited by SindyDix; 12-12-2007 at 06:52 PM. Reason: admin link edit pending supporting vendor status
10-11-2007, 04:53 PM
#43
Senior Member
Join Date: 06-16-2007
Location: Illinois
Posts: 1,259
That coilover setup looks really good. I have a couple questions though: Are the rear springs still used with the rear coilovers, or are they removed? Also it says there is up to 4" of adjustment, is that 2" above or below stock ride height, or up to 4" below stock, or somewhere in between?
12-12-2007, 10:06 AM
#46
Member
Thread Starter
Join Date: 04-07-2006
Location: Toronto
Posts: 44
It's been a while, so here we are to ressurect a thread that still has a lot of merrit. At this point, we've gone through pain-steakingly in the design of our ram air intake for the HHR with CrashMan82 
At this point we've started the jigging for the tube layout and we're eagerly awaiting construction of our filter housing charge box! (which is in a 3D model a couple pages back)... this baby should be ready for production mid-January!
At this point we've started the jigging for the tube layout and we're eagerly awaiting construction of our filter housing charge box! (which is in a 3D model a couple pages back)... this baby should be ready for production mid-January!
12-12-2007, 05:09 PM
#47
Senior Member
Join Date: 06-16-2007
Location: Illinois
Posts: 1,259
I've been thinking about the coilovers. The rear setup seems a little strange to me, with the weight of the rear being supported by mounts that were designed for shocks. Unless I'm thinking about this wrong.
01-22-2008, 08:29 AM
#49
Member
Thread Starter
Join Date: 04-07-2006
Location: Toronto
Posts: 44
04-23-2009, 11:52 AM
#50
New Member
Join Date: 11-04-2008
Location: new york
Posts: 9
2.4 hhr with a few mods
Greetings,
We're a Toronto, Canada based company interested in supporting the HHR market with hardcore HHR components and engine kits.
At this time, We are leading FWD/RWD manufacturer of custom parts dealt through our network of dealers throughout North America.
We see the specific HHR models as excellent platforms and would love to support your vehicles with such products as, Camshafts, Entire Valve-Train components Cylinder Head kits, Fully-Built Engines, Drive-train components, bolt-ons (cold air intakes), suspension upgrades, headers (polyurethane mounts, coil over kits, etc.)
Pending approval by the moderators of this site, we will post more information about our company. We hope there will be enough support!
Let us know your interest!
We're a Toronto, Canada based company interested in supporting the HHR market with hardcore HHR components and engine kits.
At this time, We are leading FWD/RWD manufacturer of custom parts dealt through our network of dealers throughout North America.
We see the specific HHR models as excellent platforms and would love to support your vehicles with such products as, Camshafts, Entire Valve-Train components Cylinder Head kits, Fully-Built Engines, Drive-train components, bolt-ons (cold air intakes), suspension upgrades, headers (polyurethane mounts, coil over kits, etc.)
Pending approval by the moderators of this site, we will post more information about our company. We hope there will be enough support!
Let us know your interest!