Oldblue

If you look at post #31 the clutch line hose has the clip. Have a close look at the line,

RJ_RS_SS_350

You sure? Looks like it's in the master cylinder. I just see the groove in the metal on the end of the hose. And another clip in the slave cylinder.

tomasorta

Thanks so much, I already bought the master cylinder(yes include the retainer clip) online in rock auto. I just need to disconnect from the clutch pedal and twist to come off.
Thanks so much for your support guys!!

Oldblue

Does the new master cylinder eliminate the crusty rusty piece? Or is that part of the clutch line?

RJ_RS_SS_350

That's the line. Post #41 shows it pretty clear.

donbrew

The red stuff is probably "Gorilla Glue"tm.

Oldblue

I see it now the photo in post #31 shows the line reversed, the higher end is the slave cylinder end . Sorry my glasses were very dirty! I’ve cleaned them now!

tomasorta

hello guys today I get the new master clutch cylinder and I replace is ok I tested put new brake fluid and I didn't see any leaking but the clutch going flexible, so I need to bleed the clutch now, but I never did that before, I bleed the brake before but never the clutch, Ihave the vaccumm for bleeding brake, so somebody has the experience bleeding the clutch?
thanks in advance

Oldblue

Same principle, use the vacuum to bleed the clutch

tomasorta

thanks oldblue but where is the feeting/valve for connect the vacuum?
thanks