Chevy HHR Network

General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

Front brake Caliper pins

Thread Tools
 
Search this Thread
 
Old 09-02-2020 | 10:28 PM
  #1  
Bonez's Avatar
Bonez
Thread Starter
Senior Member
 
Joined: 04-06-2020
Posts: 920
From: Missouri
Front brake Caliper pins
One slide pin has a rubber insert, Does it go in the top or bottom of the front caliper.. The book dont state which is which ??
Reply
Old 09-02-2020 | 10:31 PM
  #2  
sleeper's Avatar
sleeper
Platinum Member
 
Joined: 01-09-2007
Posts: 15,984
From: SE USA
Mine went in on top. I think the logic is to absorb the caliper movement when brakes are applied. So there isn't a clunk (metal to metal)..
Reply
Old 09-03-2020 | 08:02 AM
  #3  
Oldblue's Avatar
Oldblue
Administrator
 
Joined: 10-13-2011
Posts: 37,843
From: Welland,Ont Canada
Mine are in the top!
Reply
Old 09-03-2020 | 11:19 AM
  #4  
the_shmoo's Avatar
the_shmoo
Premium Member
 
Joined: 07-16-2006
Posts: 532
From: Stoney Creek, Ontario, Canada
According to the service manual the one with the rubber bushing is on top as per previous posts.
Reply
Old 09-03-2020 | 03:35 PM
  #5  
Blue_SS's Avatar
Blue_SS
Senior Member
 
Joined: 06-07-2011
Posts: 2,180
From: SE Mich
It should be the forward pin if you look at the rotation of the rotor, for the reason Sleeper said. Always that way..
Reply
Old 09-03-2020 | 04:10 PM
  #6  
Bonez's Avatar
Bonez
Thread Starter
Senior Member
 
Joined: 04-06-2020
Posts: 920
From: Missouri
Thanks, exactly what I thought but have been reading 2 different ways as well as the videos.... Im surprised the repair manual doesnt state this???
Reply
Old 09-03-2020 | 04:23 PM
  #7  
the_shmoo's Avatar
the_shmoo
Premium Member
 
Joined: 07-16-2006
Posts: 532
From: Stoney Creek, Ontario, Canada
Spoiler
 


Reply
Old 09-03-2020 | 05:07 PM
  #8  
Oldblue's Avatar
Oldblue
Administrator
 
Joined: 10-13-2011
Posts: 37,843
From: Welland,Ont Canada
Great , now that’s confusing
Reply
Old 09-03-2020 | 09:59 PM
  #9  
sleeper's Avatar
sleeper
Platinum Member
 
Joined: 01-09-2007
Posts: 15,984
From: SE USA
In the illustration, # 2 is pointing to the undercut for the rubber insert.

Actually I think life would still go on with it in either location.. Just saying..

Reply
Old 09-04-2020 | 07:40 AM
  #10  
Oldblue's Avatar
Oldblue
Administrator
 
Joined: 10-13-2011
Posts: 37,843
From: Welland,Ont Canada
Ah, yes that little rubber oring.
Reply



Advanced Search

All times are GMT -5. The time now is 11:42 AM.