HHR specific tool kit
06-23-2010 | 01:03 PM
#11
Senior Member
Joined: 01-15-2008
Posts: 265
From: michigan
I hear ya Father. When I go to Phoenix for a month I also take 2 milk crates crammed with waxes, cleaners, spray lubes, spray paint, towels and a bag with 2 sided tape, velcro, pin stripes and "stuff" that I spend a lot of time on the HHR with.
Zombies, that's what the always present .45 is for............
Zombies, that's what the always present .45 is for............
06-23-2010 | 01:26 PM
#12
Senior Member
Joined: 01-21-2010
Posts: 1,700
From: The Middie OHIO
That's some funny stuff right there 
06-23-2010 | 02:05 PM
#13
Thread Starter
Member
Joined: 06-20-2010
Posts: 80
From: Roseville, MI
I hear ya Father. When I go to Phoenix for a month I also take 2 milk crates crammed with waxes, cleaners, spray lubes, spray paint, towels and a bag with 2 sided tape, velcro, pin stripes and "stuff" that I spend a lot of time on the HHR with.
Zombies, that's what the always present .45 is for............
Zombies, that's what the always present .45 is for............
06-23-2010 | 09:43 PM
#14
Senior Member
Joined: 01-15-2008
Posts: 265
From: michigan
Very familiar with condition 1. Father may be on to something so I might just grab a machete and a pair bolt cutters from the barn. I've got a tac crowbar around here somewhere but haven't seen it in long time so I'll just move the D cell mag light from the rear storage bins up closer to the front.
Ya just never know................
Ya just never know................
06-28-2010 | 12:32 PM
#16
Thread Starter
Member
Joined: 06-20-2010
Posts: 80
From: Roseville, MI
so, this thread fell apart. totally disintegrated.
my goal was a SIMPLE light maintenance tool kit, specific to my HHR, to keep in my HHR.
so far, i had the hand tools to do an oil change.
15mm 3/8 socket for oil drain plug- i have since removed this tool because i bought a fumotovalve/quickoildrainvalve.
32mm 3/8 low profile socket for oil filter cap
3/8 ratchet
6" 3/8 extension
3/8 drive torque wrench
i have since added the tools to change the air filter.
8mm 3/8 socket
T-25 and T-20 Torx bit
screwdriver handle for Torx bit
i included both the T-25 and T-20 because different tutorials had conflicting tool lists. maybe the Torx bits are year specific (i have a 2010). the minute i find out which one i actually need, i will remove to one i do not need.
my goal was a SIMPLE light maintenance tool kit, specific to my HHR, to keep in my HHR.
so far, i had the hand tools to do an oil change.
15mm 3/8 socket for oil drain plug- i have since removed this tool because i bought a fumotovalve/quickoildrainvalve.
32mm 3/8 low profile socket for oil filter cap
3/8 ratchet
6" 3/8 extension
3/8 drive torque wrench
i have since added the tools to change the air filter.
8mm 3/8 socket
T-25 and T-20 Torx bit
screwdriver handle for Torx bit
i included both the T-25 and T-20 because different tutorials had conflicting tool lists. maybe the Torx bits are year specific (i have a 2010). the minute i find out which one i actually need, i will remove to one i do not need.
06-28-2010 | 12:51 PM
#18
Thread Starter
Member
Joined: 06-20-2010
Posts: 80
From: Roseville, MI
70judge, great idea.
i will put together a kit for material (probably a strong crush-resistant small plastic box) as well. so far i figure i would put in one of each bulb (headlight, taillights) and couple of each of the common fuses.
the 70 judge is a favorite of mine. amazing machine.
i will put together a kit for material (probably a strong crush-resistant small plastic box) as well. so far i figure i would put in one of each bulb (headlight, taillights) and couple of each of the common fuses.
the 70 judge is a favorite of mine. amazing machine.
06-28-2010 | 12:53 PM
#19
Thread Starter
Member
Joined: 06-20-2010
Posts: 80
From: Roseville, MI
