Installed OEM fogs on 2010 HHR LS-pics and questions.
#71
I went into the dealership and a gentleman at the parts dept. handed me a series of toolboxes FULL of various pins and connectors. He said to dig through and see which ones may work. They are a round pin- small, but not the smallest. They are ECM connectors. I took about 5 of each type ranging in size, really small "o" to "0" to "O".
I asked him how much they were and he let me leave with them-no charge.
I have no part number. They are small, round female pins.
At the PDC I just used as small audio female connector that I expanded slightly with a small flathead. It worked fine.
You have a GS550? Nice.
I have a 1969 T500 Titan MkIII
And a 2001 Ducati 996.
I asked him how much they were and he let me leave with them-no charge.
I have no part number. They are small, round female pins.
At the PDC I just used as small audio female connector that I expanded slightly with a small flathead. It worked fine.
You have a GS550? Nice.
I have a 1969 T500 Titan MkIII
And a 2001 Ducati 996.
#73
"Terminal/Tray: 15359541/4"
Notice these are actually two part numbers, I presume the first is what you need and the second is the connector body or tray.
Don't understand the reference to "PDC" in your post.
#74
The fuse block under the hood-or any fused source of power.
#76
This appears to be the P/N for the BCM end. I'm looking for the PDC end. I may have to go the route of Nacademus and adapt one of my MANY crimp-on connectors. They all seem to be either too wide across, or too thin through...
Thread
Thread Starter
Forum
Replies
Last Post
biglefthhr
Brakes | Suspension | Shocks | Struts
4
02-16-2010 01:19 PM
DARK AGE 53
Brakes | Suspension | Shocks | Struts
13
06-21-2006 08:53 PM