P062f
#12
https://store.allcomputerresources.c...ol-module.html
I suggest contacting them first.
A weld on the TCM , can I see photos of that, for further information
I suggest contacting them first.
A weld on the TCM , can I see photos of that, for further information
#13
https://store.allcomputerresources.c...ol-module.html
I suggest contacting them first.
A weld on the TCM , can I see photos of that, for further information
I suggest contacting them first.
A weld on the TCM , can I see photos of that, for further information
Welds in the bottom left hand corner
#14
Because the code does not apply to a specific module. Since you did the ground wire crap, I suspect the TCM. Do you have any of these symptoms?
BTW, you are misreading the meaning of the code. Semantics are odd. It does not mean THE control module has an internal fault. It means the ECM has detected an internal fault in a control module, usually the TCM.
Why and when did you do the facebook foolishness?
Look on eBay there used to be a few places that program a used ECM for around $100.
That is not a weld, it is where someone touched the module to the positive terminal. It is probably trashed.
BTW, you are misreading the meaning of the code. Semantics are odd. It does not mean THE control module has an internal fault. It means the ECM has detected an internal fault in a control module, usually the TCM.
Why and when did you do the facebook foolishness?
Look on eBay there used to be a few places that program a used ECM for around $100.
That is not a weld, it is where someone touched the module to the positive terminal. It is probably trashed.
#15
Because the code does not apply to a specific module. Since you did the ground wire crap, I suspect the TCM. Do you have any of these symptoms?
BTW, you are misreading the meaning of the code. Semantics are odd. It does not mean THE control module has an internal fault. It means the ECM has detected an internal fault in a control module, the TCM.
Why and when did you do the facebook foolishness?
Look on eBay there used to be a few places that program a used ECM for around $100.
BTW, you are misreading the meaning of the code. Semantics are odd. It does not mean THE control module has an internal fault. It means the ECM has detected an internal fault in a control module, the TCM.
Why and when did you do the facebook foolishness?
Look on eBay there used to be a few places that program a used ECM for around $100.
And no just long-term and short term memory fault
#18
Try these, I have got one that was working and returned it because it wasn't my problem with no issue. Not sure it was this same guy.
ECM
https://www.ebay.com/sch/i.html?_fro...acat=0&_sop=15
TCM
https://www.ebay.com/itm/20388121306...Bk9SR6ao-eHuYA
ECM
https://www.ebay.com/sch/i.html?_fro...acat=0&_sop=15
TCM
https://www.ebay.com/itm/20388121306...Bk9SR6ao-eHuYA