General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

Timing belt or chain?

Thread Tools
 
Search this Thread
 
Old 04-08-2009 | 11:18 AM
  #1  
wagoneer's Avatar
Thread Starter
Senior Member
 
Joined: 05-25-2008
Posts: 185
From: Denver, Co.
Timing belt or chain?

So does the HHR have a timing belt or Chain?
Old 04-08-2009 | 11:21 AM
  #2  
pitbull76's Avatar
Senior Member
 
Joined: 11-20-2006
Posts: 931
From: Peoria, IL
chain
Old 04-08-2009 | 11:23 AM
  #3  
wagoneer's Avatar
Thread Starter
Senior Member
 
Joined: 05-25-2008
Posts: 185
From: Denver, Co.
How often do you have to service it?
Old 04-08-2009 | 11:32 AM
  #4  
pitbull76's Avatar
Senior Member
 
Joined: 11-20-2006
Posts: 931
From: Peoria, IL
you don't. Timing chains usually last the life of the engine and do not need to be changed. Read the manual and I'm pretty sure it isn't mentioned to ever change it.
Old 04-08-2009 | 11:34 AM
  #5  
wagoneer's Avatar
Thread Starter
Senior Member
 
Joined: 05-25-2008
Posts: 185
From: Denver, Co.
Thanks
Old 04-08-2009 | 12:22 PM
  #6  
09 Panel's Avatar
Senior Member
 
Joined: 02-20-2009
Posts: 596
From: Charleston, S.C.
I'm guessing that we have an interference engine though, right?
Old 04-08-2009 | 02:16 PM
  #7  
masterchief1112's Avatar
Senior Member
 
Joined: 06-04-2008
Posts: 1,882
From: Toledo, OH
interference engines use a rubber timing belt.
Old 04-08-2009 | 02:19 PM
  #8  
09 Panel's Avatar
Senior Member
 
Joined: 02-20-2009
Posts: 596
From: Charleston, S.C.
Nope not true

My sports cars are non-interference and use a rubber timing belt.

My Subaru is interference and uses a rubber timing belt.

What the timing belt/chain is made from has nothing to do with if it's interference or not.
Old 04-08-2009 | 03:09 PM
  #9  
HipHotRod's Avatar
Senior Member
 
Joined: 01-04-2008
Posts: 2,366
From: Long Beach, Ca
There are two types of engines that use timing belts. They are described as: "Interference Engines" and "Non-interference Engines" The difference lies in the proximity between the valves and the pistons. On an interference engine, if the timing belt slips even one notch, the piston can crash into an open valve causing serious engine damage by bending valves and breaking pistons. Non-interference engines will usually not self destruct, but in either case if the belt fails, the engine will immediately shut down leaving you stranded.

Let me be a part of the "Chain Gang" anyday.
Old 04-08-2009 | 03:19 PM
  #10  
09 Panel's Avatar
Senior Member
 
Joined: 02-20-2009
Posts: 596
From: Charleston, S.C.
Chains break too with the same result if you have a interference engine.

Again the question is are our engines interference??



All times are GMT -5. The time now is 08:39 AM.