Jacking point + jack stands
10-24-2007 | 10:13 PM
#2
Senior Member
Joined: 08-17-2006
Posts: 1,851
From: Ottawa, Ontario
I haven't successfully gotten my HHR on jack stands yet (haven't really needed to) but I would say that the best place would probably be the subframe.
There are a couple of "holes" on the underside of the body (behind the front wheels and in front of the back wheels) that I assume are for the new lifts used for unibody vehicles, but when I tried using them, I thought the metal was bending a bit (not 100% sure on that).
Hopefully someone that has actually done this will chime in :)
There are a couple of "holes" on the underside of the body (behind the front wheels and in front of the back wheels) that I assume are for the new lifts used for unibody vehicles, but when I tried using them, I thought the metal was bending a bit (not 100% sure on that).
Hopefully someone that has actually done this will chime in :)
10-24-2007 | 10:47 PM
#3
Senior Member
Joined: 10-19-2005
Posts: 20,687
From: Miami
Thread
Thread Starter
Forum
Replies
Last Post