Please vote 1-10 (07 Chevrolet HHR LS Panel Wagon)
#4
I don't like the matte and primer look. The retro hood ornament is nice on a different finish, a retro color.
If you are going to use a SS bumper cover you should get a SS grille.
Are you aware of the damage to bearings and handling issues that are possible with reverse rims/altered offset? For show only, no problem. On the front turning radius, camber and caster are affected. On front and rear, the bearing are not designed to have the load farther out.
Bugatti Atlantiqe 10
yours 5
If you are going to use a SS bumper cover you should get a SS grille.
Are you aware of the damage to bearings and handling issues that are possible with reverse rims/altered offset? For show only, no problem. On the front turning radius, camber and caster are affected. On front and rear, the bearing are not designed to have the load farther out.
Bugatti Atlantiqe 10
yours 5
#7
I like the retro look, prefer the stock LS / LT front bumper suede is cool but absorbs moisture. Is the epoxy primer, did you apply sealant first?
I’m with the show only thinking on the reverse rims, I have put a lot of miles on my LS and my LT and the OEM offset works best
These had a 35 mm offset, stock is 42 mm
I’m with the show only thinking on the reverse rims, I have put a lot of miles on my LS and my LT and the OEM offset works best
These had a 35 mm offset, stock is 42 mm