Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

2008 HHR SS overheating

Thread Tools
 
Search this Thread
 
Old 08-15-2013 | 11:38 PM
  #51  
Kylo's Avatar
Thread Starter
New Member
 
Joined: 06-19-2008
Posts: 13
From: Buffalo
sorry it took so long to reply guys ....I been busy working 16 hour days and my 2nd car, 1990 Mustang 5.0, the fuel pump went. What a week!

I got my HHR back $1000 later...we didn't replace the water pump because it seemed to be good, moving freely. I saw the parts and here's what we think happened. The guides, which I think are nylon or plastic, a piece broke off and jammed in the chain that runs the water pump and balancer..which in turned snapped the chain. There is another chain in there that is the timming chain, which explains why the car was still running. As far as the damage to other parts...there wasn't any. He said when he opened it up the chain was just laying at the bottom of the case. I might have had a little luck on my side there.

parts replaced
1 Timming chain
2 water pump chain
3 tensioner
4 water pump sprocket
5 guides
6 oil
7 gasket
Old 08-15-2013 | 11:46 PM
  #52  
Kylo's Avatar
Thread Starter
New Member
 
Joined: 06-19-2008
Posts: 13
From: Buffalo
Didn't replace the water pump because on the 2.0 turbo it is another 4 hours of labor
Old 08-16-2013 | 12:25 AM
  #53  
whopper's Avatar
Platinum Member
 
Joined: 04-09-2006
Posts: 7,039
From: Vancouver, BC, Canada
Oh wow - yeah it sounds like luck was on your side. It sure could have been a lot worse. Still, $1100 is a bit of a shock. Yours is the first on this forum I think, with that extent of damage due to guides/tensioners failing.

Well, I am glad to hear you got it back.
Old 08-16-2013 | 01:39 AM
  #54  
blacky's Avatar
Banned
 
Joined: 11-19-2008
Posts: 123
From: oregon
Originally Posted by Kylo
sorry it took so long to reply guys ....I been busy working 16 hour days and my 2nd car, 1990 Mustang 5.0, the fuel pump went. What a week!

I got my HHR back $1000 later...we didn't replace the water pump because it seemed to be good, moving freely. I saw the parts and here's what we think happened. The guides, which I think are nylon or plastic, a piece broke off and jammed in the chain that runs the water pump and balancer..which in turned snapped the chain. There is another chain in there that is the timming chain, which explains why the car was still running. As far as the damage to other parts...there wasn't any. He said when he opened it up the chain was just laying at the bottom of the case. I might have had a little luck on my side there.

parts replaced
1 Timming chain
2 water pump chain
3 tensioner
4 water pump sprocket
5 guides
6 oil
7 gasket

Ok, but what about the engine temperature with the new water pump chain?

Did the mechanic explain why the engine did not immediately overheat without the water pump operating?

Last edited by blacky; 08-16-2013 at 12:27 PM.
Old 08-16-2013 | 09:08 AM
  #55  
db/sb's Avatar
Senior Member
 
Joined: 06-26-2006
Posts: 1,876
From: San Bernardino, California
Originally Posted by blacky
Ok, but what about the engine temperature with the new water pump chain?
I would guess that with the water pump actually turning now (and pumping water), that the temperature is okay.
Old 08-16-2013 | 12:32 PM
  #56  
blacky's Avatar
Banned
 
Joined: 11-19-2008
Posts: 123
From: oregon
Originally Posted by db/sb
I would guess that with the water pump actually turning now (and pumping water), that the temperature is okay.
Why guess when the OP is here to tell us?
Old 08-16-2013 | 01:26 PM
  #57  
Kylo's Avatar
Thread Starter
New Member
 
Joined: 06-19-2008
Posts: 13
From: Buffalo
Originally Posted by blacky
Ok, but what about the engine temperature with the new water pump chain?

Did the mechanic explain why the engine did not immediately overheat without the water pump operating?
The engine Temp now is around 197-205, didn't ask about that.
Old 08-16-2013 | 01:58 PM
  #58  
blacky's Avatar
Banned
 
Joined: 11-19-2008
Posts: 123
From: oregon
Originally Posted by Kylo
The engine Temp now is around 197-205, didn't ask about that.
How does that compare with engine temperature before overheating issue began?
Old 08-16-2013 | 07:34 PM
  #59  
Kylo's Avatar
Thread Starter
New Member
 
Joined: 06-19-2008
Posts: 13
From: Buffalo
Yes, it's the same. I looked today driving into, work all highway, and it stayed at 194.
Old 08-16-2013 | 08:30 PM
  #60  
blacky's Avatar
Banned
 
Joined: 11-19-2008
Posts: 123
From: oregon
Originally Posted by Kylo
Yes, it's the same. I looked today driving into, work all highway, and it stayed at 194.

Good job.

This one is for the history books.

It just goes to show the wisdom of being methodical and empirical with cars.


Quick Reply: 2008 HHR SS overheating



All times are GMT -5. The time now is 02:30 PM.