Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

Another No Start issue, with a twist

Thread Tools
 
Search this Thread
 
Old 08-30-2016 | 10:12 AM
  #11  
843de's Avatar
Deceased
 
Joined: 06-30-2010
Posts: 25,739
From: Kannapolis NC
Match the wires up "color to color" and use soldered splices preferably there Greybeard, and you should be up and starting again soon.

Don't forget heat shrink tape or tubing to weather proof the splices, and when the Grey-Mobile has to sit for extended periods. Put mothballs under the hood in mesh bags or old nylons, because "woodland critters" hate the Camphor smell given of by the mothballs.

You might also pull your airbox and open it up, you might recall we've had folks end up with rat, mice, and squirrel nests in them.
Old 08-30-2016 | 12:25 PM
  #12  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 25,339
From: Fredericksburg,VA
In fact, the last "mystery" was caused by mice in the air box, just a few weeks ago.
Old 08-30-2016 | 01:33 PM
  #13  
Greybeard999's Avatar
Thread Starter
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
Soldered and shrink wrapped.... and taped. Critter didn't leave me with much wire on 4 out of the 8 wires it chewed through. I should really have a new pigtail/plug end for that harness for it to be right. Everything now works as it should.

I should have dug a little deeper before I bothered you guys... Thanks for the help.


Most mothballs aren't camphor anymore, there is an animal repellent called "No Zone" that is old fashioned camphor mothballs in little vented plastic bags. Get the refill packages. I've had little success with what is now sold as regular mothballs.

Peppermint oil works too and has a more desirable smell...
Old 08-30-2016 | 03:23 PM
  #14  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 25,339
From: Fredericksburg,VA
Figure out exactly which connector and we can find the part number.
Old 08-30-2016 | 04:21 PM
  #15  
Greybeard999's Avatar
Thread Starter
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
I don't know...

It sits about 10-12 inches below the fuse panel under the hood. White plug with a gray plastic hood over it. Mine had 10 wires but it looks like it may be a 14 pin connector. (I'm guessing at 14 but there were several dummy pins)

It was a bytch to get at for repairs...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Archbold
Problems/Service/Repairs
0
02-05-2012 10:12 AM
VinceP
Audio and Video
4
01-01-2012 09:27 PM
X_EGO_BRAIN_X
Problems/Service/Repairs
6
02-06-2011 11:07 AM
gcsd3742
HHR SS
5
07-25-2008 11:10 AM



Quick Reply: Another No Start issue, with a twist



All times are GMT -5. The time now is 12:21 PM.