problems with idle on remote start?
#11
You could, BUT as Lucky has sagely pointed out, HHR batteries are vented externally to the atmosphere to avoid the build-up of explosive gases as the alternator charges the battery.
Also, if you go this route, make sure the improvised cabling arrangement cannot come into contact with the body's sheetmetal or any other paths to ground...otherwise you'll have a really big bang when the battery shorts out.
Also, if you go this route, make sure the improvised cabling arrangement cannot come into contact with the body's sheetmetal or any other paths to ground...otherwise you'll have a really big bang when the battery shorts out.
#12
Brian Wasilowski rather than run 3 different threads on what looks like is the same issue, please keep it to this single thread - it just makes it much easier to follow, and lessens confusion overall.
I've just merged your three threads into one.
I've just merged your three threads into one.
#17
Your a god sent I went and got a new battery installed free of course... Why do it myself if it's free... I digress Anywho Got in the car check engine light was still on and remote start wouldn't work..... Stopped at the gas station on the way home... And when i started it back up with the key,because remote start still wasn't working the check engine light was gone..... Got home and did a code scan the abs code was gone ,but the p0300 code multiple misfire was still there saved it said..... So I erased the codes.. Checked it again and no codes, plus the remote start started working again..... I can't believe a old/dying battery caused all this..... I guess welcome to technology.... smh..... I thank you very much and everyone else that gave me good feedback....
#20
Your a god sent I went and got a new battery installed free of course... Why do it myself if it's free... I digress Anywho Got in the car check engine light was still on and remote start wouldn't work..... Stopped at the gas station on the way home... And when i started it back up with the key,because remote start still wasn't working the check engine light was gone..... Got home and did a code scan the abs code was gone ,but the p0300 code multiple misfire was still there saved it said..... So I erased the codes.. Checked it again and no codes, plus the remote start started working again..... I can't believe a old/dying battery caused all this..... I guess welcome to technology.... smh..... I thank you very much and everyone else that gave me good feedback....