Bought a 2010 panel month ago anyone having problems with sticking cargo doors? I did solve the problem by adding springs with bicycle inner tube as boot to body just blow latch on body to help push door open when release button is pushed. Just wondering if another way heard adding 2mm washers to control arm but didn't want to take door apart

 

ad the same issue but all i had to do was clean the rubber stops well and it stopped sticking, maybe try using white grease on them

 

When you say rubber stops do you mean the rubber molding that wraps all around?

 

Every so often, I'll put some ArmorAll on a rag and wipe down the door seal, then the doors stop sticking.

 

Thanks I'll try that white grease is petroleum base don't want it on rubber. I installed a #52 spring cut to about 1 3/4 looped a center loop attached it with bicycle inner tube piece as boot just below latch on frame works every time except after rain dries around seal hit button twice opens

 

Make sure you spray the armorall on the rag, armorall will stain your paint.

 

Pictures?

 

Just saw your post of pictures? Did you want pic of booted spring attached? I'll try to figure out how to post a pic

 

You could even post a "how-to" with pictures, you may not be the only one!

I can not visualize your fix at all.

As for posting pics. go to the "how-to" section, the tutorial is a sticky. I hate posting links when it's that easy.

 

donbrew read some on how to post pics when they start talking copy paste stuff your losing me have to get my son over some time and show me... love to send pics... everyone always tell me "easy, nothing to it"