Theft, broken slide rear glass, how to install replacement?
08-20-2012, 08:03 AM
#13
Senior Member
Thread Starter
Join Date: 06-18-2009
Location: Monterrey, México
Posts: 856
. I´m talking about the window that George is refering...Would you please share your wisdom with us to see how I can put a new one 
?Thanks!
08-20-2012, 08:21 AM
#14
Senior Member
Thread Starter
Join Date: 06-18-2009
Location: Monterrey, México
Posts: 856
I´m afraid that probably the main intention was to steal my HHR. I had about 5 brand new CDs (With their plastic wrap) on the back that I recently purchased, and however he didn´t steal that...
08-20-2012, 02:32 PM
#15
Founding Member
Join Date: 11-23-2007
Location: Texas
Posts: 8,210
Let's try this again.
Preliminary Procedures
1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
3. Remove the rear side door window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
4. Remove the rear side door window outer sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
1 Rear Side Door Window Bolt (Qty: 2)
Notice: Refer to Fastener Notice .
Tip
Loosen the bolts enough to let the window glass move free from the window regulator clamp.
Tighten
10 N·m (89 lb in)
2 Rear Side Door Window
Preliminary Procedure
Remove the rear door window. (see above)
1 Rear Side Door Window Outer Sealing Strip Screws (Qty:2)
Notice: Refer to Fastener Notice .
Tighten
10 N·m (89 lb in)
2 Rear Side Door Window Outer Sealing Strip
Tip
1. Pull the rear window stationary seal from the pinch weld flanges.
2. Lubricate the rear window stationary seal to install.
3. The rear door stationary window is part of the rear side door window outer sealing strip assembly.
08-20-2012, 03:29 PM
#16
Senior Member
Thread Starter
Join Date: 06-18-2009
Location: Monterrey, México
Posts: 856
Attachment 13240
Attachment 13241
Preliminary Procedure
Remove the rear door window. (see above)
1 Rear Side Door Window Outer Sealing Strip Screws (Qty:2)
Notice: Refer to Fastener Notice .
Tighten
10 N·m (89 lb in)
2 Rear Side Door Window Outer Sealing Strip
Tip
1. Pull the rear window stationary seal from the pinch weld flanges.
2. Lubricate the rear window stationary seal to install.
3. The rear door stationary window is part of the rear side door window outer sealing strip assembly.
Attachment 13241
Preliminary Procedure
Remove the rear door window. (see above)
1 Rear Side Door Window Outer Sealing Strip Screws (Qty:2)
Notice: Refer to Fastener Notice .
Tighten
10 N·m (89 lb in)
2 Rear Side Door Window Outer Sealing Strip
Tip
1. Pull the rear window stationary seal from the pinch weld flanges.
2. Lubricate the rear window stationary seal to install.
3. The rear door stationary window is part of the rear side door window outer sealing strip assembly.
! I think that I Should just follow the procedure above, not sure if I need to remove the moving glass from the first image. I just require to replace the door stationary window included on the outer strip assembly.Thanks a lot ChevyMgr!!
08-29-2012, 10:44 AM
#18
Member
Join Date: 08-01-2012
Location: North Carolina
Posts: 53
Thieves suck!
Glad I got a Panel! Seems like those back windows are an easy target for thieves. But if someone wants to steal your car (or items in it) there are many ways to get inside the vehicle (even without breaking any glass). Bummer & sorry to hear this type of story.
Thread
Thread Starter
Forum
Replies
Last Post
bman4775
Problems/Service/Repairs
22
09-28-2013 09:42 PM